计算机辅助设计与制作的一体化氧化锆全瓷桩核5年临床观察

doi:10.3969/j.issn.1671-167X.2018.04.019

北京大学学报(医学版) ›› 2018, Vol. 50 ›› Issue (4): 680-684. doi: 10.3969/j.issn.1671-167X.2018.04.019

计算机辅助设计与制作的一体化氧化锆全瓷桩核5年临床观察

周团锋1，王新知2△

（北京大学口腔医学院·口腔医院， 1.门诊部， 2.修复科国家口腔疾病临床医学研究中心口腔数字化医疗技术和材料国家工程实验室口腔数字医学北京市重点实验室，北京100034）

出版日期:2018-08-18 发布日期:2018-08-18
通讯作者: 王新知 E-mail:xinzwang@sina.com

Clinical observation of the restoration of computer aided designed and manufactured one-piece zirconia posts and cores: a 5-year prospective follow-up study

ZHOU Tuan-feng1, WANG Xin-zhi 2△

(1. First Clinical Division, 2. Department of Prosthodontics, Peking University School and Hospital of Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Laboratory for Digital and Material Technology of Stomatology & Beijing Key Laboratory of Digital Stomatology, Beijing 100034, China)

Online:2018-08-18 Published:2018-08-18
Contact: WANG Xin-zhi E-mail:xinzwang@sina.com

摘要/Abstract

摘要： 目的：观察计算机辅助设计与制作一体化氧化锆全瓷桩核修复牙体缺损的临床效果。方法：选取47例患者，72颗牙体缺损的患牙接受了计算机辅助设计与制作的一体化氧化锆全瓷桩核及全瓷冠的修复。临床分为2组，A组： 3壁或4壁牙体缺损患牙39颗，B组： 2壁或1壁牙体缺损患牙33颗。临床观察修复后桩核的稳定性、有无桩核脱落、牙体组织折裂和桩核的折断，同时采用美国公共健康协会（United States Public Health Service，USPHS）的修订标准，观察修复体的颜色匹配性和边缘密合性。结果：47例患者，平均观察约（65.0±4.8）月。在观察期间，通过临床和X线检查，两组均未发现有桩核的脱落、折断和牙体组织的折裂，修复体完整。配对t检验，P>0.05,A、B两组修复效果差异无统计学意义。修复体与邻牙颜色匹配性：A级67颗，B级5颗，颜色匹配率为93.06%；边缘密合性检查：A级64颗，B级8颗，边缘密合度率为88.89%。结论：计算机辅助设计与制作的一体化氧化锆全瓷桩核修复牙体缺损有良好临床效果，可以作为牙体缺损患牙桩核冠修复的一种较好的临床选择。

关键词: 全瓷材料, 计算机辅助设计与制作, 氧化锆, 桩核

Abstract: Objective： To evaluate the effect of computer aided design and computer aided manufacture (CAD/CAM) one-piece zirconia posts and cores for the restoration of defective teeth. Methods: In the study,72 defective teeth of 47 patients who had proper root canal therapy were restored with CAD/CAM onepiece zirconia posts and cores. All the ceramic crowns were finally used to restore contour and function of the teeth. The defective teeth were divided into two groups on the basis of the teeth defect degree. Group A: 39 defective teeth presented with three or four coronal residual walls, and group B: 33 defective teeth presented with less than two coronal residual walls. During the clinical observation period, the stability, dislocation of posts and the occurrence of fractures in either teeth or posts and cores were assessed and analyzed with a paired t test（α=0.05）. Meanwhile shade matching was conducted between the restored teeth and normal reference teeth, the marginal fitness of the restored teeth were recorded according to the standard of United States Public Health Service (USPHS) and analyzed with descriptive statistics. Results: The average follow up was (65.0±4.8) months. During the observation period, the restorations were examined both clinically and with periapical radiograph. No incidence of teeth fracture or posts and cores complications were observed in both groups, and all CAD/CAM onepiece zirconia posts and cores remained intact with restored teeth. There were no post and core dislodgement or fracture. There was no difference between group A and group B (P>0.05). The restorative effect of CAD/CAM onepiece zirconia posts and cores with all the ceramic crowns were assessed according to the standard of USPHS, and the number of the restored tooth shade matching with level A was 67, and 5 with level B. The rate of shade matching was 93.06%. As the marginal fitness, 64 restored teeth were level A, and 8 with level B. The rate of restorative teeth marginal fitness was 88.89%.Conclusion: CAD/CAM one-piece zirconia posts and cores were successfully used to restore defective teeth and received excellent clinical effect. So, it can be a good choice for defective teeth which need postcores and crowns restoration.

Key words: Ceramic material, Computer aided design and computer aided manufacture, Zirconia, Post and core

中图分类号:

R783.3

周团锋，王新知. 计算机辅助设计与制作的一体化氧化锆全瓷桩核5年临床观察[J]. 北京大学学报(医学版), 2018, 50(4): 680-684.

ZHOU Tuan-feng, WANG Xin-zhi . Clinical observation of the restoration of computer aided designed and manufactured one-piece zirconia posts and cores: a 5-year prospective follow-up study[J]. Journal of Peking University(Health Sciences), 2018, 50(4): 680-684.

参考文献

相关文章 15

[1]	王铮,丁茜,高远,马全诠,张磊,葛兮源,孙玉春,谢秋菲. 氧化锆多孔表面显微形貌对成骨细胞增殖及分化的影响[J]. 北京大学学报（医学版）, 2022, 54(1): 31-39.
[2]	李文锦,丁茜,原福松,孙丰博,郑剑桥,鲍蕊,张磊. 飞秒激光表面处理对氧化锆表面特征及弯曲强度的影响[J]. 北京大学学报（医学版）, 2021, 53(4): 770-775.
[3]	杨欣,李榕,叶红强,陈虎,王勇,周永胜,孙玉春. 不同刃状边缘补偿角度的两种氧化锆全瓷冠断裂强度的评价[J]. 北京大学学报（医学版）, 2021, 53(2): 402-405.
[4]	张媛,韩建民,刘林,邓旭亮. 一体化玻璃纤维桩修复漏斗状根管粘接强度的体外研究[J]. 北京大学学报（医学版）, 2019, 51(2): 327-334.
[5]	郑苗,詹凌璐,刘志强,李和平,谭建国. 不同等离子体处理氧化锆对人牙龈成纤维细胞黏附能力的影响[J]. 北京大学学报（医学版）, 2019, 51(2): 315-320.
[6]	崔新悦，佟岱，王新知，沈志坚. 对比切削与胶态成型工艺制作的氧化锆陶瓷的透光性与遮色效果[J]. 北京大学学报(医学版), 2018, 50(1): 85-90.
[7]	廖宇，刘晓强，陈立，周建锋，谭建国. 不同表面处理方法对氧化锆与树脂水门汀粘接强度的影响[J]. 北京大学学报(医学版), 2018, 50(1): 53-57.
[8]	焦洋，王继德，邓久鹏. 不同表面处理对氧化锆晶相结构及性能的影响[J]. 北京大学学报(医学版), 2018, 50(1): 49-52.
[9]	张丽丽, 罗铮, 张一, 刘玉华. 两种自酸蚀核树脂/水门汀与冠部牙本质粘接强度的比较[J]. 北京大学学报（医学版）, 2015, 47(2): 364-367.
[10]	周团锋, 张相皞, 王新知. 一体化计算机辅助设计与制作氧化锆桩核的三维有限元分析[J]. 北京大学学报（医学版）, 2015, 47(1): 78-84.
[11]	吕品, 姜婷. 热酸蚀处理对氧化锆表面剪切粘接强度的影响[J]. 北京大学学报（医学版）, 2014, 46(2): 302-305.
[12]	周团锋，张相皞，王新知. 计算机辅助设计与制作的一体化氧化锆全瓷桩核抗折力的体外对比实验[J]. 北京大学学报（医学版）, 2014, 46(1): 81-85.
[13]	刘亦洪，王勇，张庆辉，高原，冯海兰. 基底冠设计对氧化锆全瓷冠抗力的影响[J]. 北京大学学报（医学版）, 2014, 46(1): 71-75.
[14]	罗铮，张丽丽，张一，刘玉华，徐军. 牙槽骨高度降低对桩核修复的上颌前磨牙抗折强度的影响[J]. 北京大学学报（医学版）, 2014, 46(1): 62-66.
[15]	李智, 王新知, 高承志, IVO Krejci. 计算机辅助设计与制作一体化玻璃纤维桩核修复漏斗状根管的抗疲劳和抗折性能[J]. 北京大学学报（医学版）, 2013, 45(1): 59-63.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

计算机辅助设计与制作的一体化氧化锆全瓷桩核5年临床观察

Clinical observation of the restoration of computer aided designed and manufactured one-piece zirconia posts and cores: a 5-year prospective follow-up study

RICH HTML

PDF (PC)

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 10