Abstract: Objective： To obtain three-dimensional intraosseous artery of the hamate and to provide the vascular anatomy basis of hamate fracture fixation. Methods: PbO (lead monoxide, Sinopharm Chemical Reagent Beijing Co. Ltd) was ground into particles less than 40 μm and suspended in turpentine oil (Chemical Reagent Beijing Co. Ltd) at ratios of 1 g ∶1.5 mL, 1 g ∶1 mL and 1 g ∶0.5 mL. Three specimens were investigated. Brachial arteries were cannulated and perfused with lead-based contrast agent. Hamates were harvested and scanned using micro-computed tomography (microCT). The acquisition protocols were as follows: CT scan setup: total rotation ［Degrees］, 360; rotation steps, 360; X-ray detector setup: transaxial, 2048; axial, 2048; exposure time, 1 500 ms, Binning, 1; system magnification: high-med. X-ray tube setup: 80 kV, 500 mA current. The down-sampling factor used in the reconstruction was 2. The effective voxel size of the final image was 27.30 μm. The three-dimensional model of the hamate was generated and the distribution and pattern of vessels were evaluated. Results: There were abundant extraosseous vessels around the hamate. They were mainly running in the tendons and li-gaments around the hamate. Four vascular zones were identified on the hamate surface. They were on the palmar platform of the hamate body, on the dorsal side, on the ulnar side and on the tip of hamulus, namely. There were anastomoses among 4 vascular zones. We did not observe any vessels penetrating through the articular cartilage. The extraosseous vessels of the vascular zones gave a number of intraosseous branches into the hamate. The hamate body received intraosseous blood supply from the dorsal, palmar and ulnar while the hamulus from the palmar, ulnar and hamulus tip. There were some intraosseous branches anastomosing with each other. Conclusion: The extraosseous and intraosseous vessels of the hamate were more than what used to be considered. The hamate body and hamulus received blood supply from multiple directions and arteries anastomosed extensively both outside and inside the hamate, making it possible that the intraosseous perfusion survived after fracture. It is likely that the nonunion after the hamate fracture is not caused by the vascular damage but the malalignment of the fragments.

Key words: Hamate, Intraosseous vessel, MicroCT