Journal of Peking University(Health Sciences) ›› 2014, Vol. 46 ›› Issue (6): 963-968.

• Articles • Previous Articles     Next Articles

Evaluation method with radiographic image quality indicator for internal defects of dental casting metallic restoration

LI Yuan, ZHENG Gang△, LIN Hong   

  1. (Dental Material Laboratory, Peking University School and Hospital of Stomatology; National Engineering Laboratory for Digital and Material Technology of Stomatology, Beijing 100081, China)
  • Online:2014-12-18 Published:2014-12-18

Abstract: Objective:To develop a new kind of dental radiographic image quality indicator (IQI) for internal quality of casting metallic restoration to influence on its usage life. Methods: Radiographic image quality indicator method was used to evaluate the depth of the defects region and internal quality of 127 casting metallic restoration and the accuracy was compared with that of conventional callipers me-thod. Results: In the 127 cases of casting metallic restoration, 9 were found the thickness less than 0.7 mm and the thinnest thickness only 0.2 mm in 26 casting metallic crowns or bridges’ occlusal defects region. The data measured by image quality indicator were consistent with those measured by conventional gauging. Two metal inner crowns were found the thickness less than 0.3 mm in 56 porcelain crowns or bridges. The thickness of casting removable partial denture was more than 1.0 mm, but thinner regions were not found. It was found that in a titanium partial denture, the Xray image of clasp was not uniform and there were internal porosity defects in the clasp. Conclusion: Special dental image quality indicator can solve the visual error problems caused by different observing backgrounds and estimate the depth of the defects region in the casting.

Key words: Dental prosthesis, Dental casting technique, Radiography, dental, digital, Image quality indicator

[1] Sui LI,Wenjie MA,Shimin WANG,Qian DING,Yao SUN,Lei ZHANG. Trueness of different digital design methods for incisal guidance of maxillary anterior implant-supported single crowns [J]. Journal of Peking University (Health Sciences), 2024, 56(1): 81-87.
[2] Meng-en OU,Yun DING,Wei-feng TANG,Yong-sheng ZHOU. Three-dimensional finite element analysis of cement flow in abutment margin-crown platform switching [J]. Journal of Peking University (Health Sciences), 2023, 55(3): 548-552.
[3] SUN Yu-chun,GUO Yu-qing,CHEN Hu,DENG Ke-hui,LI Wei-wei. Independent innovation research, development and transformation of precise bionic repair technology for oral prosthesis [J]. Journal of Peking University (Health Sciences), 2022, 54(1): 7-12.
[4] WANG Juan,YU Hua-jie,SUN Jing-de,QIU Li-xin. Application evaluation of prefabricated rigid connecting bar in implants immediate impression preparation of edentulous jaw [J]. Journal of Peking University (Health Sciences), 2022, 54(1): 187-192.
[5] MA Ke-nan,CHEN Hu,SHEN Yan-ru,ZHOU Yong-sheng,WANG Yong,SUN Yu-chun. Finite element analyses of retention of removable partial denture circumferential clasps manufactured by selective laser melting [J]. Journal of Peking University (Health Sciences), 2022, 54(1): 105-112.
[6] Feng LIANG,Min-jie WU,Li-dong ZOU. Clinical observation of the curative effect after 5-year follow-up of single tooth implant-supported restorations in the posterior region [J]. Journal of Peking University (Health Sciences), 2021, 53(5): 970-976.
[7] Lin-lin LI,Yi-jiao ZHAO,Hu CHEN,Yong WANG,Yu-chun SUN. Accuracy of intercuspal occlusion in 3D reconstruction with the dental articulator position method [J]. Journal of Peking University(Health Sciences), 2020, 52(1): 138-143.
[8] Qiang LUO,Qian DING,Lei ZHANG,Qiu-fei XIE. Quantitative analysis of occlusal changes in posterior partial fixed implant supported prostheses [J]. Journal of Peking University(Health Sciences), 2019, 51(6): 1119-1123.
[9] ZHAO Li-ping, ZHAN Ya-lin, HU Wen-jie, WANG Hao-jie, WEI Yi-ping, ZHEN Min, Xu Tao, LIU Yun-song. Dental implantation and soft tissue augmentation after ridge preservation in a molar site: a case report [J]. Journal of Peking University(Health Sciences), 2016, 48(6): 1090-1094.
[10] CUI Hong-Yan, DI Ping, LI Jian-Hui, LIN Ye, LIU Rong-Rong. Application of spark erosion technology in manufacture of implant prosthesis [J]. Journal of Peking University(Health Sciences), 2015, 47(2): 336-339.
[11] NIE Jie, WANG Xiao-Yan, GAO Xue-Jun. Micro-CT observations of the adaptation at gingival wall in Class Ⅱ restorations with different dental restorative materials [J]. Journal of Peking University(Health Sciences), 2015, 47(2): 317-320.
[12] YANG Xin, SUN Yi-Fei, TIAN Lei, SI Wen-Jie, FENG Hai-Lan, LIU Yi-Hong. Precision of digital impressions with TRIOS under simulated intraoral impression taking conditions [J]. Journal of Peking University(Health Sciences), 2015, 47(1): 85-89.
[13] YANG Xue, RONG Qi-Guo, YANG Ya-Dong. Influence of attachment type on stress distribution of implant-supported removable partial dentures [J]. Journal of Peking University(Health Sciences), 2015, 47(1): 72-77.
[14] JIANG Xi, LIN Ye, HU Xiu-Lian, DI Ping, LUO Jia, LI Jian-Hui. Computer-assisted implant restoration of free-end partially edentulous mandible with severe vertical bone deficiency [J]. Journal of Peking University(Health Sciences), 2014, 46(2): 294-298.
[15] LIU Yi-hong, WANG Yong, ZHANG Qing-hui, GAO Yuan, FENG Hai-lan. Fracture reliability of zirconia all-ceramic crown according to zirconia coping design [J]. Journal of Peking University(Health Sciences), 2014, 46(1): 71-75.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!