Journal of Peking University (Health Sciences) ›› 2020, Vol. 52 ›› Issue (4): 755-761. doi: 10.19723/j.issn.1671-167X.2020.04.030
Previous Articles Next Articles
Ren-tao TANG1,Xin-hai LI2,Jiang-li YU3,Lin FENG1,△(),Xue-jun GAO1
CLC Number:
[1] |
Saygili G, Sahmali S. Effect of ceramic surface treatment on the shear bond strengths of two resin luting agents to all-ceramic materials[J]. J Oral Rehabil, 2003,30(7):758-764.
doi: 10.1046/j.1365-2842.2003.01027.x pmid: 12791165 |
[2] | Reich S, Wichmann M, Rinne H, et al. Clinical performance of large, all-ceramic CAD/CAM-generated restorations after three years: a pilot study[J]. J Am Dent Assoc, 2004,135(5):605-612. |
[3] |
Otto T, De Nisco S. Computer-aided direct ceramic restorations: a 10-year prospective clinical study of Cerec CAD/CAM inlays and onlays[J]. Int J Prosthodont, 2002,15(2):122-128.
pmid: 11951800 |
[4] | Otto T, Schneider D. Long-term clinical results of chairside Cerec CAD/CAM inlays and onlays: a case series[J]. Int J Prostho-dont, 2008,21(1):53-59. |
[5] |
Papia E, Larsson C, du Toit M, et al. Bonding between oxide ceramics and adhesive cement systems: a systematic review[J]. J Biomed Mater Res B Appl Biomater, 2014,102(2):395-413.
doi: 10.1002/jbm.b.33013 pmid: 24123837 |
[6] | Tian T, Tsoi JK, Matinlinna JP, et al. Aspects of bonding between resin luting cements and glass ceramic materials[J]. Dental Mater, 2014,30(7):e147-e162. |
[7] | Ozcan M, Barbosa S, Melo R, et al. Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions[J]. Dental Mater, 2007,23(10):1276-1282. |
[8] |
Brendeke J, Ozcan M. Effect of physicochemical aging conditions on the composite-composite repair bond strength[J]. J Adhes Dent, 2007,9(4):399-406.
pmid: 17847643 |
[9] |
Sharif MO, Catleugh M, Merry A, et al. Replacement versus repair of defective restorations in adults: resin composite [J]. Cochrane Database Syst Rev, 2014(2): CD005971.
doi: 10.1002/14651858.CD009961.pub2 pmid: 25922858 |
[10] |
Melo MA, Moyses MR, Santos SG, et al. Effects of different surface treatments and accelerated artificial aging on the bond strength of composite resin repairs[J]. Braz Oral Res, 2011,25(6):485-491.
pmid: 22147227 |
[11] |
Cho SD, Rajitrangson P, Matis BA, et al. Effect of Er, Cr:YSGG laser, air abrasion, and silane application on repaired shear bond strength of composites[J]. Oper Dent, 2013,38(3):E58-E66.
doi: 10.2341/11-054-L |
[12] |
Blum IR, Lynch CD, Wilson NH. Factors influencing repair of dental restorations with resin composite[J]. Clin Cosmet Investig Dent, 2014,6:81-87.
doi: 10.2147/CCIDE.S53461 pmid: 25378952 |
[13] |
Barcellos DC, Miyazaki Santos VM, Niu L, et al. Repair of composites: Effect of laser and different surface treatments[J]. Int J Adhes Adhes, 2015,59:1-6.
doi: 10.1016/j.ijadhadh.2015.01.008 |
[14] |
Padipatvuthikul P, Mair LH. Bonding of composite to water aged composite with surface treatments[J]. Dent Mater, 2007,23(4):519-525.
pmid: 16765431 |
[15] |
Loomans BAC, Vivan Cardoso M, Roeters FJM, et al. Is there one optimal repair technique for all composites?[J]. Dent Mater, 2011,27(7):701-709.
pmid: 21571359 |
[16] |
Goyal S. Silanes: Chemistry and applications[J]. J Indian Prosthodont Soc, 2006,6(1):14-18.
doi: 10.4103/0972-4052.25876 |
[17] |
Dal Piva AMDO, Tribst JPM, de Carvalho PCK, et al. Effect of surface treatments on the bond repair strength of resin composite to different artificial teeth[J]. Appl Adhes Sci, 2018,6(1):1-7.
doi: 10.1186/s40563-017-0102-z |
[18] |
Sirin Karaarslan E, Ozsevik AS, Cebe MA, et al. Bond strength of repaired composite resins: surface treatments, adhesive systems, and composite type[J]. J Adhes Sci Technol, 2016,30(5):520-533.
doi: 10.1080/01694243.2015.1111187 |
[19] |
Alqarni D, Nakajima M, Hosaka K, et al. The repair bond strength to resin matrix in cured resin composites after water aging[J]. Dent Mater J, 2019,38(2):233-240.
doi: 10.4012/dmj.2018-044 pmid: 30449829 |
[20] |
Flury S, Dulla FA, Peutzfeldt A. Repair bond strength of resin composite to restorative materials after short-and long-term storage[J]. Dent Mater, 2019,35(9):1205-1213.
pmid: 31146960 |
[21] |
Monticelli F, Osorio R, Mazzitelli C, et al. Limited decalcification diffusion of self-adhesive cements into dentin[J]. J Dent Res, 2008,87(10):974-979.
pmid: 18809754 |
[22] |
Demunck J. Bonding of an auto-adhesive luting material to enamel and dentin[J]. Dent Mater, 2004,20(10):963-971.
pmid: 15501325 |
[23] |
Fukuda R, Yoshida Y, Nakayama Y, et al. Bonding efficacy of polyalkenoic acids to hydroxyapatite, enamel and dentin[J]. Biomaterials, 2003,24(11):1861-1867.
doi: 10.1016/s0142-9612(02)00575-6 pmid: 12615476 |
[24] |
Al-Assaf K, Chakmakchi M, Palaghias G, et al. Interfacial characteristics of adhesive luting resins and composites with dentine[J]. Dent Mater, 2007,23(7):829-839.
doi: 10.1016/j.dental.2006.06.023 pmid: 16934865 |
[25] | Reis A, Grandi V, Carlotto L, et al. Effect of smear layer thickness and acidity of self-etching solutions on early and long-term bond strength to dentin[J]. J Dentistry, 2005,33(7):549-559. |
[26] |
Youm S, Jung K, Son S, et al. Effect of dentin pretreatment and curing mode on the microtensile bond strength of self-adhesive resin cements[J]. J Adv Prosthodont, 2015,7(4):317-322.
doi: 10.4047/jap.2015.7.4.317 pmid: 26330979 |
[27] |
Cornelio RB, Wikant A, Mjosund H, et al. The influence of bis-EMA vs bis GMA on the degree of conversion and water susceptibility of experimental composite materials[J]. Acta Odontol Scand, 2014,72(6):440-447.
pmid: 24255958 |
[28] |
Yoon TH, Lee YK, Lim BS, et al. Degree of polymerization of resin composites by different light sources[J]. J Oral Rehabil, 2002,29(12):1165-1173.
pmid: 12472853 |
[29] |
Vankerckhoven H, Lambrechts P, van Beylen M, et al. Unreac-ted methacrylate groups on the surfaces of composite resins[J]. J Dent Res, 1982,61(6):791-795.
pmid: 7045184 |
[30] |
Goncalves F, Kawano Y, Pfeifer C, et al. Influence of BisGMA, TEGDMA, and BisEMA contents on viscosity, conversion,and flexural strength of experimental resins and composites[J]. Eur J Oral Sci, 2009,117(4):442-446.
doi: 10.1111/j.1600-0722.2009.00636.x pmid: 19627357 |
[31] |
Imbery TA, Gray T, Delatour F, et al. Evaluation of flexural, diametral tensile, and shear bond strength of composite repairs[J]. Oper Dent, 2014,39(6):E250-E260.
doi: 10.2341/13-299-L pmid: 25084105 |
[32] |
Matinlinna JP, Lassila LV, Ozcan M, et al. An introduction to silanes and their clinical applications in dentistry[J]. Int J Prosthodont, 2004,17(2):155-164.
pmid: 15119865 |
[1] | Wei-wei LI,Hu CHEN,Yong WANG,Yu-chun SUN. Research on friction and wear behaviors of silicon-lithium spray coating on zirconia ceramics [J]. Journal of Peking University (Health Sciences), 2023, 55(1): 94-100. |
[2] | Qiu-ju LI,Wei-yu GONG,Yan-mei DONG. Effect of bioactive glass pretreatment on the durability of dentin bonding interface [J]. Journal of Peking University (Health Sciences), 2020, 52(5): 931-937. |
[3] | WANG Yue,LIANG Yu-hong. Influence of surface treatment with sodium hypochlorite solution on dentin bond strength [J]. Journal of Peking University(Health Sciences), 2017, 49(1): 105-109. |
|