Email Alert | RSS

Journal of Peking University (Health Sciences) ›› 2022, Vol. 54 ›› Issue (1): 140-145. doi: 10.19723/j.issn.1671-167X.2022.01.022

Previous Articles     Next Articles

Marginal features of CAD/CAM laminate veneers with different materials and thicknesses

LI Yi1,WONG Lai U2,LIU Xiao-qiang1,△(),ZHOU Ti3,LYU Ji-zhe1,TAN Jian-guo1   

  1. 1. Department of Prosthodontics, Peking University School and Hospital of Stomatology & National Center of Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Laboratory for Digital and Material Technology of Stomatology, Beijing 100081, China
    2. Stomatological College of Nanjing Medical University, Nanjing 210029, China
    3. Department of Prosthodontics, Fushan Clinical Division, Yantai Stomatological Hospital, Yantai 264001, Shandong, China
  • Received:2021-10-08 Online:2022-02-18 Published:2022-02-21
  • Contact: Xiao-qiang LIU E-mail:liuxiaoqiang@bjmu.edu.cn
  • Supported by:
    National Clinical Key Discipline Construction Project(PKUSSNMP-201901);Program for New Clinical Techniques and Therapies of Peking University School and Hospital of Stomatology(PKUSSNCT-21B01)

RICH HTML

   

PDF (PC)

Abstract:

Objective: To analyze the marginal roughness and marginal fitness of chairside computer-aided design and computer-aided manufacturing (CAD/CAM) laminate veneers with different materials and thicknesses, and to provide a reference for the clinical application of laminate veneers. Methods: The butt-to-butt type laminate veneers were prepared on resin typodonts, the preparations were scanned, and the laminate veneers were manufactured by chairside CAD/CAM equipment. The laminate veneers were divided into four groups (n=9) according to the materials (glass-matrix ceramics and resin-matrix ceramics) and thickness (0.3 mm and 0.5 mm) of the veneers, with a total of 36. The marginal topo-graphies of each laminate veneer were digitally recorded by stereomicroscope, and the marginal rough-nesses of the laminate veneers were determined by ImageJ software. The marginal fitness of the laminate veneers was measured by a fit checker and digital scanning and measuring method. At the same time, the mechanical properties of glass-matrix ceramic and resin-matrix ceramic bars (n=20) were tested by a universal testing device. Results: The marginal roughness of 0.3 mm and 0.5 mm glass-matrix ceramic laminate veneers was (24.48±5.55) μm and (19.06±5.75) μm, respectively, with a statistically significant difference (P<0.001). The marginal roughness of 0.3 mm and 0.5 mm resin-matrix ceramic laminate veneers was (6.13±1.27) μm and (6.84±2.19) μm, respectively, without a statistically significant difference (P>0.05). The marginal roughness of the glass-matrix ceramic laminate veneers was higher than that of the resin-matrix ceramic laminate veneers with a statistically significant difference (P<0.001). The marginal fitness of 0.3 mm and 0.5 mm glass-matrix ceramic laminate veneers were (66.30±26.71) μm and (85.48±30.44) μm, respectively. The marginal fitness of 0.3 mm and 0.5 mm resin-matrix ceramic laminate veneers were (56.42±19.27) μm and (58.36±8.33) μm, respectively. There was no statistically significant difference among the 4 groups (P>0.05). For glass-matrix ceramics, the flexural strength was (327.40±54.25) MPa, the flexural modulus was (44.40±4.39) GPa, and the modulus of resilience was (1.24±0.37) MPa. For resin-matrix ceramics, the flexural strength was (173.71±16.61) MPa, the flexural modulus was (11.88±0.51) GPa, and the modulus of resilience was (1.29±0.27) MPa. The flexural strength and modulus of glass-matrix ceramics were significantly higher than those of resin-matrix ceramics (P<0.001), but there was no statistically significant difference in the modulus of resilience between the two materials (P>0.05). Conclusion: The marginal roughness of CAD/CAM glass-matrix ceramic laminate veneers is greater than that of resin-matrix ceramic laminate veneers, but there was no statistically significant difference in marginal fitness among them. Increasing the thickness can reduce the marginal roughness of glass-matrix ceramic laminate veneers, but has no effect on the marginal roughness of resin-matrix ceramic laminate veneers.

Key words: Dental veneers, Ceramics, Computer-aided design, Dental marginal adaptation, Materials testing

CLC Number: 

  • R783.1

Table 1

Information of four groups of laminate veneers"

Material Thickness/mm Color Composition
Glass-matrix ceramics 0.3 LT/A2 SiO2 58.5%-72.5%, Li2O 13%-15%, K2O 3%-5%, other oxides 7.5%-25%
Glass-matrix ceramics 0.5 LT/A2 SiO2 58.5%-72.5%, Li2O 13%-15%, K2O 3%-5%, other oxides 7.5%-25%
Resin-matrix ceramics 0.3 LT/A2 Resin polymer 13%-43%, inorganic filler 55%-85%, additives <1%, colorant <1%
Resin-matrix ceramics 0.5 LT/A2 Resin polymer 13%-43%, inorganic filler 55%-85%, additives <1%, Colorant <1%

Figure 1

Resin typodont used in this study"

Figure 2

Measurement of marginal roughness of laminate veneers (Marginal curve of laminate veneer was marked by white line, marginal roughness was measured by green line)"

Figure 3

Annotation points for marginal fitness of laminate veneers"

Figure 4

Schematic diagram of 3-point flexural test"

Figure 5

Marginal topography of laminate veneers A, macrophotograph of laminate veneers, dashed box represents area observed under stereomicroscope; B-E, stereomicrograph of laminate veneers at ×50 magnification (B, 0.3 mm glass-matrix ceramics; C, 0.5 mm glass-matrix ceramics; D, 0.3 mm resin-matrix ceramics; E, 0.5 mm resin-matrix ceramics)."

Figure 6

Marginal roughness of laminate veneers * P<0.05, vs. 0.3 mm glass-matrix ceramics; # P<0.05, vs. 0.5 mm glass-matrix ceramics."

Figure 7

Marginal fitness of laminate veneers"

Table 2

Mechanical properties of ceramics"

Material Flexural strength/MPa Flexural modulus/GPa Modulus of resilience/MPa
Glass-matrix ceramics 327.40±54.25 44.40±4.39 1.24±0.37
Resin-matrix ceramics 173.71±16.61* 11.88±0.51* 1.29±0.27
P value <0.001 <0.001 0.632
[1] Spitznagel FA, Boldt J, Gierthmuehlen PC. CAD/CAM ceramic restorative materials for natural teeth[J]. J Dent Res, 2018, 97(10):1082-1091.
doi: 10.1177/0022034518779759 pmid: 29906206
[2] Padrós R, Giner L, Herrero-Climent M, et al. Influence of the CAD-CAM systems on the marginal accuracy and mechanical pro-perties of dental restorations[J]. Int J Env Res Pub He, 2020, 17(12):4276.
doi: 10.3390/ijerph17124276
[3] Ruse ND, Sadoun MJ. Resin-composite blocks for dental CAD/CAM applications[J]. J Dent Res, 2014, 93(12):1232-1234.
doi: 10.1177/0022034514553976 pmid: 25344335
[4] Zhang Y, Kelly JR. Dental ceramics for restoration and metal veneering[J]. Dent Clin North Am, 2017, 61(4):797-819.
doi: S0011-8532(17)30071-X pmid: 28886769
[5] 中华口腔医学会口腔美学专业委员会, 中华口腔医学会口腔材料专业委员会. 全瓷美学修复材料临床应用专家共识[J]. 中华口腔医学志, 2019, 54(12):825-828.
[6] Lambert H, Durand JC, Jacquot B, et al. Dental biomaterials for chairside CAD/CAM: State of the art[J]. J Adv Prosthodont, 2017, 9(6):486-495.
doi: 10.4047/jap.2017.9.6.486 pmid: 29279770
[7] Yamaguchi S, Kani R, Kawakami K, et al. Fatigue behavior and crack initiation of CAD/CAM resin composite molar crowns[J]. Dent Mater, 2018, 34(10):1578-1584.
doi: S0109-5641(18)30331-2 pmid: 30049596
[8] Gracis S, Thompson VP, Ferencz JL, et al. A new classification system for all-ceramic and ceramic-like restorative materials[J]. Int J Prosthodont, 2015, 28(3):227-235.
doi: 10.11607/ijp.4244
[9] Chavali R, Nejat AH, Lawson NC. Machinability of CAD-CAM materials[J]. J Prosthet Dent, 2017, 118(2):194-199.
doi: 10.1016/j.prosdent.2016.09.022
[10] Alqahtani F. Marginal fit of all-ceramic crowns fabricated using two extraoral CAD/CAM systems in comparison with the conventional technique[J]. Clin Cosmet Inv Dent, 2017(9):13-18.
[11] Bindl A, Mörmann WH. Marginal and internal fit of all-ceramic CAD/CAM crown-copings on chamfer preparations[J]. J Oral Rehabil, 2005, 32(6):441-447.
pmid: 15899023
[12] Memari Y, Mohajerfar M, Armin A, et al. Marginal adaptation of CAD/CAM all-ceramic crowns made by different impression methods: A literature review[J]. J Prosthodont, 2019, 28(2):536-544.
doi: 10.1111/jopr.2019.28.issue-5
[13] Contrepois M, Soenen A, Bartala, et al. Marginal adaptation of ceramic crowns: A systematic review[J]. J Prosthet Dent, 2013, 110(6):447-454.
doi: 10.1016/j.prosdent.2013.08.003 pmid: 24120071
[14] Awada A, Nathanson D. Mechanical properties of resin-ceramic CAD/CAM restorative materials[J]. J Prosthet Dent, 2015, 114(4):587-593.
doi: 10.1016/j.prosdent.2015.04.016
[15] 刘晓强, 谭建国. 一步一步做好微创修复的贴面牙体预备[J]. 中华口腔医学杂志, 2021, 56(3):306-310.
[16] Lee H, Kim HS, Noh K, et al. A simplified method for evaluating the 3-dimensional cement space of dental prostheses by using a digital scanner[J]. J Prosthet Dent, 2017, 118(5):584-586.
[17] Yang Y, Yang Z, Zhou J, et al. Effect of tooth preparation design on marginal adaptation of composite resin CAD-CAM onlays[J]. J Prosthet Dent, 2020, 124(1):88-93.
doi: S0022-3913(19)30540-2 pmid: 31672425
[18] Awad D, Stawarczyk B, Liebermann A, et al. Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness[J]. J Prosthet Dent, 2015, 113(6):534-540.
doi: 10.1016/j.prosdent.2014.12.003
[19] 李德利, 谭建国. 一步一步做好全瓷修复体抛光[J]. 中华口腔医学杂志, 2021, 56(4):396-400.
[20] Wright MD, Masri R, Driscoll CF, et al. Comparison of three systems for the polishing of an ultra-low fusing dental porcelain[J]. J Prosthet Dent, 2004, 92(5):486-490.
doi: 10.1016/j.prosdent.2004.07.021
[21] Freire Y, Gonzalo E, Lopez-Suarez C, et al. Evaluation of the marginal fit of monolithic crowns fabricated by direct and indirect digitization[J]. J Prosthodont Res, 2021, 65(3):291-297.
doi: 10.2186/jpr.JPR_D_20_00003
[22] Dureja I, Yadav B, Malhotra P, et al. A comparative evaluation of vertical marginal fit of provisional crowns fabricated by computer-aided design/computer-aided manufacturing technique and direct (intraoral technique) and flexural strength of the materials: An in vitro study[J]. J Indian Prosthodont Soc, 2018, 18(4):314-320.
doi: 10.4103/jips.jips_306_17
[23] Papadiochou S, Pissiotis AL. Marginal adaptation and CAD-CAM technology: A systematic review of restorative material and fabrication techniques[J]. J Prosthet Dent, 2018, 119(4):545-551.
doi: S0022-3913(17)30488-2 pmid: 28967399
[24] Schaefer O, Watts DC, Sigusch BW, et al. Marginal and internal fit of pressed lithium disilicate partial crowns in vitro: A three-dimensional analysis of accuracy and reproducibility[J]. Dent Mater, 2012, 28(3):320-326.
doi: 10.1016/j.dental.2011.12.008 pmid: 22265824
[25] 林红. 口腔材料学[M]. 2版. 北京: 北京大学医学出版社, 2013: 12-13.
[1] Jiajia ZHENG,Xue YANG,Quan WEN,Yuan FU,Xiao SHAO,Meili DING. Application of bioactive ceramics iRoot BP Plus® in pulpotomy for complicated crown fracture of immature permanent anterior teeth in children [J]. Journal of Peking University (Health Sciences), 2024, 56(1): 179-184.
[2] Xinyu XU,Ling WU,Fengqi SONG,Zili LI,Yi ZHANG,Xiaojing LIU. Mandibular condyle localization in orthognathic surgery based on mandibular movement trajectory and its preliminary accuracy verification [J]. Journal of Peking University (Health Sciences), 2024, 56(1): 57-65.
[3] Sui LI,Wenjie MA,Shimin WANG,Qian DING,Yao SUN,Lei ZHANG. Trueness of different digital design methods for incisal guidance of maxillary anterior implant-supported single crowns [J]. Journal of Peking University (Health Sciences), 2024, 56(1): 81-87.
[4] Wei-wei LI,Hu CHEN,Yong WANG,Yu-chun SUN. Research on friction and wear behaviors of silicon-lithium spray coating on zirconia ceramics [J]. Journal of Peking University (Health Sciences), 2023, 55(1): 94-100.
[5] FENG Sha-wei,GUO Hui,WANG Yong,ZHAO Yi-jiao,LIU He. Initial establishment of digital reference standardized crown models of the primary teeth [J]. Journal of Peking University (Health Sciences), 2022, 54(2): 327-334.
[6] QIU Shu-ting,ZHU Yu-jia,WANG Shi-min,WANG Fei-long,YE Hong-qiang,ZHAO Yi-jiao,LIU Yun-song,WANG Yong,ZHOU Yong-sheng. Preliminary clinical application verification of complete digital workflow of design lips symmetry reference plane based on posed smile [J]. Journal of Peking University (Health Sciences), 2022, 54(1): 193-199.
[7] XU Xiao-xiang,CAO Ye,ZHAO Yi-jiao,JIA Lu,XIE Qiu-fei. In vitro evaluation of the application of digital individual tooth tray in the impression making of mandibular full-arch crown abutments [J]. Journal of Peking University (Health Sciences), 2021, 53(1): 54-61.
[8] YUE Zhao-guo,ZHANG Hai-dong,YANG Jing-wen,HOU Jian-xia. Comparison of residual cement between CAD/CAM customized abutments and stock abutments via digital measurement in vitro [J]. Journal of Peking University (Health Sciences), 2021, 53(1): 69-75.
[9] LI Zheng,LIU Yu-shu,WANG Shi-min,ZHANG Rui,JIA Lu,YE Hong-qiang,HU Wen-jie,ZHAO Wen-yan,LIU Yun-song,ZHOU Yong-sheng. Application of biocopy function of temporary crown occlusal morphology in patients with severe attrition [J]. Journal of Peking University (Health Sciences), 2021, 53(1): 62-68.
[10] FANG Shuo-bo,YANG Guang-ju,KANG Yan-feng,SUN Yu-chun,XIE Qiu-fei. Method and accuracy of determining the jaw position of repositioning splint with the aid of digital technique [J]. Journal of Peking University (Health Sciences), 2021, 53(1): 76-82.
[11] Lang YOU,Ke-hui DENG,Wei-wei LI,Yi-jiao ZHAO,Yu-chun SUN,Yong-sheng ZHOU. Visual sensitivity threshold of lateral view of nasolabial Angle changes in edentulous jaw patients [J]. Journal of Peking University(Health Sciences), 2020, 52(1): 107-112.
[12] Shuo CHEN,Yang HE,Jin-gang AN,Yi ZHANG. Application of computer-aided virtual mandibular position in the simultaneous treatment of children with temporomandibular joint ankylosis and jaw deformity [J]. Journal of Peking University(Health Sciences), 2019, 51(5): 954-958.
[13] Xin-xin LI,Yu-shu LIU,Yu-chun SUN,Hu CHEN,Hong-qiang YE,Yong-sheng ZHOU. Evaluation of one-piece polyetheretherketone removable partial denture fabricated by computer-aided design and computer-aided manufacturing [J]. Journal of Peking University(Health Sciences), 2019, 51(2): 335-339.
[14] Kuan-paul WANG,Hong-qiang YE,Hu CHEN,Yong WANG,Yu-chun SUN,Yong-sheng ZHOU. Establishment and preliminary clinical evaluation of edentulous custom trays designed and fabricated by chair-side CAD and 3D printing systems [J]. Journal of Peking University(Health Sciences), 2019, 51(2): 349-355.
[15] Shi-min WANG,Zheng LI,Guan-bo WANG,Hong-qiang YE,Yun-song LIU,Dai TONG,Wen-hui GAO,Yong-sheng ZHOU. Preliminary clinical application of complete digital workflow of design and manufacturing occlusal splint for sleep bruxism [J]. Journal of Peking University(Health Sciences), 2019, 51(1): 105-110.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
Copyright © Journal of Peking University (Health Sciences), All Rights Reserved.
Powered by Beijing Magtech Co. Ltd