北京大学学报(医学版) ›› 2016, Vol. 48 ›› Issue (6): 1055-1059. doi: 10.3969/j.issn.1671-167X.2016.06.023

• 论著 • 上一篇    下一篇

氧化锆全瓷贴面修复重度变色前牙美学效果评价

周团锋1△,王新知2,刘婧寅1,孙庆3,王鑫开3   

  1. (北京大学口腔医学院·口腔医院1.第一门诊部, 2.修复科, 3.义齿加工中心二部口腔数字化医疗技术和材料国家工程实验室口腔数字医学北京市重点实验室, 北京 100034)
  • 出版日期:2016-12-18 发布日期:2016-12-18
  • 通讯作者: 周团锋 E-mail: 1442880187@qq.com
  • 基金资助:

    北京大学口腔医院临床新技术新疗法重点项目(PKUSSNCT-14A10)资助

Preliminary clinical evaluation of the esthetic effect of deep discolored anterior teeth restored with zirconia veneers

ZHOU Tuan-feng 1△, WANG Xin-zhi2, LIU Jing-yin1, SUN Qing3, WANG Xin-kai3   

  1. (1. First Clinical Division, 2. Department of Prosthodontics, 3. The Second Division of Dental Technical Lab, Peking University School and Hospital of Stomatology & National Engineering Laboratory for Digital and Material Technology of Stomatology & Beijing Key Laboratory of Digital Stomatology, Beijing 100034, China)
  • Online:2016-12-18 Published:2016-12-18
  • Contact: ZHOU Tuan-feng E-mail: 1442880187@qq.com
  • Supported by:

    Supported by the Program for New Clinical Techniques and Therapies of Peking University School of Stomatology(PKUSSNCT-14A10)

摘要:

目的:观察氧化锆全瓷贴面修复重度变色前牙的临床修复效果。方法: 选取牙体治疗后重度变色小面积缺损的前牙,采用氧化锆基底全瓷贴面修复,同名正常前牙为对照牙,共修复15颗患牙。测量修复前后患牙唇侧颈1/3、中1/3、切1/3与对照牙色差ΔE值,明确氧化锆全瓷贴面的美学效果;参照美国公共卫生署(United States Public Health Service, USPHS)的标准观察患牙修复完成后的边缘适合性,以及修复体的折裂、脱落等。结果: 重度变色前牙氧化锆全瓷贴面修复前与对照牙颈1/3、中1/3、切1/3色差ΔE值分别为24.92±3.00、26.64±4.00和21.94±3.31,均明显高于4.0,为临床所不接受;修复后唇侧切1/3、中1/3与对照牙色差ΔE值分别为1.82±0.17和1.84±0.21,均小于2.0,有良好的匹配性,颈1/3色差ΔE值为3.92±0.48,稍小于4.0,在临床可接受的范围。患牙颈1/3、中1/3、切1/3修复前后与对照牙色差ΔE值配对t检验,t值分别为30.37、21.56和23.37,均P<0.001,修复前后患牙颜色差异有统计学意义。修复体有良好的边缘适合性,均为A级,在观察期间,修复体完整,无折裂和脱落。结论: 氧化锆全瓷贴面可作为重度变色前牙患牙美观修复的一种选择,但对于美学效果要求过高的患者要慎重使用。

关键词: 牙变色, 锆, 牙科陶瓷

Abstract:

Objective:  To observe the esthetic effect of deep discolored anterior teeth restored by zirconia veneers. Methods: Small defected deep discolored anterior teeth with complete root canal therapy were restored by zirconia veneers (n=15). The same name teeth on the other side of the same dental arch were chosen as control teeth. The color difference values ΔE of the neck 1/3, the middle 1/3 and the incisor 1/3 between the deep discolored tooth and the normal control tooth before and after therapy were measured to evaluate the esthetic effect of zirconia veneer restoration. At the same time, the margi-nal fit of zirconia veneers was checked by the standard of United States Public Health Service (USPHS). The integrity of the veneers was also examined. Results: On the labial side, fibers color difference values ΔE of the neck 1/3, the middle 1/3 and the incisor 1/3 between deep discolored teeth and normal control teeth were measured by the electronic colorimeter, which were 24.92±3.00,26.64±4.00 and 21.94±3.31 respectively. All the values were above 4.0, which were considered unacceptable in clinic. After restoration by zirconia veneers, the color difference values ΔE of the middle 1/3 and the incisor 1/3 between the restored and control teeth were 1.82±0.17 and 1.84±0.21. Both values were less than 2.0, which indicated both good color matching. The color difference value ΔE of the neck 1/3 was 3.92±0.48, which was less than 4.0 and could be accepted in clinic. The statistical analysis of the colors of the teeth before and after restoration compared with the control teeth was done by Paired t test. The t va-lues in the neck 1/3, the middle 1/3 and the incisor 1/3 were 30.37, 21.56, 23.37 respectively. In the three group,  all the P<0.001. There were obvious statistical differences. According to the standard of USPHS, the marginal fit of all the restored teeth was perfect (grade A). No zirconia veneers were broken or detached in the period of observation. Conclusion: Zirconia veneers can be a good method to restore deep discolored anterior teeth. However, it should be used cautiously when the patient’s esthetic expectation was too high.

Key words: Tooth discoloration, Zirconium, Dental porcelain

中图分类号: 

  • R783.9
[1] 丁茜,李文锦,孙丰博,谷景华,林元华,张磊. 表面处理对氧化钇和氧化镁稳定的氧化锆种植体晶相及断裂强度的影响[J]. 北京大学学报(医学版), 2023, 55(4): 721-728.
[2] 李伟伟,陈虎,王勇,孙玉春. 氧化锆陶瓷表面硅锂喷涂层的摩擦磨损性能[J]. 北京大学学报(医学版), 2023, 55(1): 94-100.
[3] 王铮,丁茜,高远,马全诠,张磊,葛兮源,孙玉春,谢秋菲. 氧化锆多孔表面显微形貌对成骨细胞增殖及分化的影响[J]. 北京大学学报(医学版), 2022, 54(1): 31-39.
[4] 李文锦,丁茜,原福松,孙丰博,郑剑桥,鲍蕊,张磊. 飞秒激光表面处理对氧化锆表面特征及弯曲强度的影响[J]. 北京大学学报(医学版), 2021, 53(4): 770-775.
[5] 杨欣,李榕,叶红强,陈虎,王勇,周永胜,孙玉春. 不同刃状边缘补偿角度的两种氧化锆全瓷冠断裂强度的评价[J]. 北京大学学报(医学版), 2021, 53(2): 402-405.
[6] 郑苗,詹凌璐,刘志强,李和平,谭建国. 不同等离子体处理氧化锆对人牙龈成纤维细胞黏附能力的影响[J]. 北京大学学报(医学版), 2019, 51(2): 315-320.
[7] 周团锋,王新知. 计算机辅助设计与制作的一体化氧化锆全瓷桩核5年临床观察[J]. 北京大学学报(医学版), 2018, 50(4): 680-684.
[8] 崔新悦,佟岱,王新知,沈志坚. 对比切削与胶态成型工艺制作的氧化锆陶瓷的透光性与遮色效果[J]. 北京大学学报(医学版), 2018, 50(1): 85-90.
[9] 廖宇,刘晓强,陈立,周建锋,谭建国. 不同表面处理方法对氧化锆与树脂水门汀粘接强度的影响[J]. 北京大学学报(医学版), 2018, 50(1): 53-57.
[10] 焦洋, 王继德, 邓久鹏. 不同表面处理对氧化锆晶相结构及性能的影响[J]. 北京大学学报(医学版), 2018, 50(1): 49-52.
[11] 周团锋, 张相皞, 王新知. 一体化计算机辅助设计与制作氧化锆桩核的三维有限元分析[J]. 北京大学学报(医学版), 2015, 47(1): 78-84.
[12] 吕品, 姜婷. 热酸蚀处理对氧化锆表面剪切粘接强度的影响[J]. 北京大学学报(医学版), 2014, 46(2): 302-305.
[13] 周团锋,张相皞,王新知. 计算机辅助设计与制作的一体化氧化锆全瓷桩核抗折力的体外对比实验[J]. 北京大学学报(医学版), 2014, 46(1): 81-85.
[14] 刘亦洪,王勇,张庆辉,高原,冯海兰. 基底冠设计对氧化锆全瓷冠抗力的影响[J]. 北京大学学报(医学版), 2014, 46(1): 71-75.
[15] 李智, 王新知, 高承志, IVO Krejci. 计算机辅助设计与制作一体化玻璃纤维桩核修复漏斗状根管的抗疲劳和抗折性能[J]. 北京大学学报(医学版), 2013, 45(1): 59-63.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!