北京大学学报(医学版) ›› 2020, Vol. 52 ›› Issue (4): 790-793. doi: 10.19723/j.issn.1671-167X.2020.04.035

• 短篇论著 • 上一篇    下一篇

填料折射率与比例对复合树脂折射率和透明度的影响

于鹏,王晓燕()   

  1. 北京大学口腔医学院·口腔医院,牙体牙髓科 国家口腔疾病临床医学研究中心 口腔数字化医疗技术和材料国家工程实验室 口腔数字医学北京市重点实验室,北京 100081
  • 收稿日期:2019-10-08 出版日期:2020-08-18 发布日期:2020-08-06
  • 通讯作者: 王晓燕 E-mail:wangxiaoyan@pkuss.bjmu.edu.cn
  • 基金资助:
    中华口腔医学会青年科研基金(CSA-R2018-03)

  • Received:2019-10-08 Online:2020-08-18 Published:2020-08-06
  • Supported by:
    Chinese Stomatological Association Research Fund(CSA-R2018-03)

RICH HTML

  

关键词: 复合树脂, 折射率, 透明度

中图分类号: 

  • R783.1

表1

本研究所用材料的具体信息"

Code Name Refractive index Category Manufacture
Bis-GMA Bisphenol A glycidyl dimethacrylate 1.58 Matrix Sigma-Aldrich, St. Louis, MO, USA
TEGDMA Triethylene glycol dimethacrylate 1.46 Matrix Esstech, Essington, PA, USA
F1.6 Silanized glass particle 1.60 Filler Schott AG, Mainz, Rheinland-Pfalz, Germany
F1.8 Silanized glass particle 1.80 Filler Schott AG, Mainz, Rheinland-Pfalz, Germany
CQ Camphorquinone Photoinitiator Sigma-Aldrich, St. Louis, MO, USA
EDMAB Ethyl-4-N,N-dimethylamin-obenzoate Accelerator Esstech, Essington, PA, USA

表2

实验复合树脂折射率(n=7)"

Filler proportion
(mass fraction)
Refractive index
F1.6 group F1.8 group
0 1.503 8±0.000 0Aa 1.503 8±0.000 0Aa
0.1% 1.503 9±0.000 0Ba 1.504 0±0.000 0Bb
0.5% 1.503 9±0.000 1Ba 1.504 0±0.000 0Bb
1.0% 1.504 2±0.000 0Ca 1.504 3±0.000 1Cb
5.0% 1.504 8±0.000 1Da 1.505 7±0.000 1Db
10.0% 1.505 2±0.000 0Ea 1.507 0±0.000 0Eb
20.0% 1.508 1±0.000 1Fa 1.513 9±0.000 1Fb
30.0% 1.511 1±0.000 1Ga 1.522 0±0.000 0Gb

图1

实验复合树脂透明度直观图"

表3

实验复合树脂透明度(n=7)"

Filler proportion
(mass fraction)
Translucency parameter
F1.6 group F1.8 group
0 59.88±1.32Aa 59.88±1.32Aa
0.1% 59.71±1.27Aa 54.82±1.72Ba
0.5% 57.96±1.95Aa 41.64±2.79Cb
1.0% 57.61±1.69Aa 33.16±1.76Db
5.0% 45.32±2.35Ba 18.43±0.75Eb
10.0% 38.71±3.64Ca 12.51±0.73Fb
20.0% 26.28±1.05Da 5.79±0.66Gb
30.0% 22.20±1.16Ea 2.64±1.28Hb
[1] Demarco FF, Collares K, Coelhodesouza FH, et al. Anterior composite restorations: A systematic review on long-term survival and reasons for failure[J]. Dent Mater, 2015,31(10):1214-1224.
doi: 10.1016/j.dental.2015.07.005 pmid: 26303655
[2] Nahsan FP, Mondelli RF, Franco EB, et al. Clinical strategies for esthetic excellence in anterior tooth restorations: Understanding color and composite resin selection[J]. J Appl Oral Sci, 2012,20(2):151-156.
doi: 10.1590/s1678-77572012000200005 pmid: 22666829
[3] Arimoto A, Nakajima M, Hosaka K, et al. Translucency, opa-lescence and light transmission characteristics of light-cured resin composites[J]. Dent Mater, 2010,26(11):1090-1097.
doi: 10.1016/j.dental.2010.07.009 pmid: 20692691
[4] Lee YK, Lu H, Powers JM. Measurement of opalescence of resin composites[J]. Dent Mater, 2005,21(11):1068-1074.
doi: 10.1016/j.dental.2005.03.015 pmid: 16099029
[5] Uo M, Okamoto M, Watari F, et al. Rare earth oxide-containing fluorescent glass filler for composite resin[J]. Dent Mater J, 2005,24(1):49-52.
doi: 10.4012/dmj.24.49 pmid: 15881207
[6] Ferraris F, Diamantopoulou S, Acunzo R, et al. Influence of enamel composite thickness on value, chroma and translucency of a high and a nonhigh refractive index resin composite[J]. Int J Esthet Dent, 2014,9(3):382-401.
pmid: 25126618
[7] Kim S, Kim EY, Jeong TS, et al. The evaluation of resin infiltration for masking labial enamel white spot lesions[J]. Int J Pae-diatr Dent, 2011,21(4):241-248.
[8] Miletic V, Jakovljevic N, Manojlovic D, et al. Refractive indices of unfilled resin mixtures and cured composites related to color and translucency of conventional and low-shrinkage composites[J]. J Biomed Mater Res Part B, 2017,105(1):7-13.
[9] Takafuji M, Kajiwara M, Hano N, et al. Preparation of high refractive index composite films based on titanium oxide nanoparticles hybridized hydrophilic polymers[J]. Nanomaterials, 2019,9(4):514.
[10] Chau JLH, Lin YM, Li AK, et al. Transparent high refractive index nanocomposite thin films[J]. Mater Lett, 2007,61(14):2908-2910.
[11] 汪羽翎, 李武松, 刘聪聪, 等. 超支化聚酯酰胺的合成及在聚碳酸酯加工中的应用[J]. 高分子学报, 2017,48(8):1304-1311.
[12] Wetteland CL, Liu H. Optical and biological properties of polymer-based nanocomposites with improved dispersion of ceramic nanoparticles[J]. J Biomed Mater Res Part A, 2018,106(10):2692-2707.
[13] Eom A, Kim D, Lee S, et al. Optical characteristics of resin composite before and after polymerization[J]. J Korean Acad Conserv Dent, 2011,36(3):219-230.
[14] Naganuma T, Kagawa Y. Effect of particle size on the optically transparent nano meter-order glass particle-dispersed epoxy matrix composites[J]. Compos Sci Technol, 2002,62(9):1187-1189.
[15] Lü C, Yang B. High refractive index organic-inorganic nanocomposites: Design, synjournal and application[J]. J Mater Chem, 2009,19(19):2884-2901.
[16] Jintoku H, Ihara H. The simplest method for fabrication of high refractive index polymer-metal oxide hybrids based on a soap-free process[J]. Chem Commun, 2014,50(73):10611-10614.
[17] Tunnicliffe LB, Thomas AG, Busfield JJ, et al. Light scattering and transmission studies of nanofiller particulate size, matrix cavitation, and high strain interfacial dewetting behavior in silica-elastomer composites[J]. J Polym Sci Part B, 2011,49(15):1084-1092.
[18] 钱程辉, 王珏. 填料含量和尺寸对复合树脂透明度的影响[J]. 上海口腔医学, 2018,27(1):33-35.
[19] Higashihara T, Ueda M. Recent progress in high refractive index polymers[J]. Macromolecules, 2015,48(7):1915-1929.
[20] Enomoto K, Kikuchi M, Narumi A, et al. Surface modifier-free organic-inorganic hybridization to produce optically transparent and highly refractive bulk materials composed of epoxy resins and ZrO2 nanoparticles[J]. ACS Appl Mater Interfaces, 2018,10(16):13985-13998.
[21] Liu J, Nakamura Y, Shibasaki Y, et al. High refractive index polyimides derived from 2,7-bis (4-aminophenylenesulfanyl)thianthrene and aromatic dianhydrides[J]. Macromolecules, 2007,40(13):4614-4620.
[22] Kim H, Ku B, Goh M, et al. Synergistic effect of sulfur and chalcogen atoms on the enhanced refractive indices of polyimides in the visible and near-infrared regions[J]. Macromolecules, 2019,52(3):827-834.
[23] Loste J, Lopezcuesta J, Billon L, et al. Transparent polymer nanocomposites: An overview on their synjournal and advanced properties[J]. Prog Polym Sci, 2019,89(89):133-158.
[1] 杨洋,浦婷婷,陈立,谭建国. 比较两种改良式印章法辅助后牙树脂牙合贴面修复的形态准确性[J]. 北京大学学报(医学版), 2021, 53(5): 977-982.
[2] 李媛,林红,张铁军. 对比传统成像与数字成像对牙科复合树脂X射线阻射性的影响[J]. 北京大学学报(医学版), 2021, 53(5): 995-1001.
[3] 穆海丽,田福聪,王晓燕,高学军. 玻璃体和通用型复合树脂耐磨性的临床对照研究[J]. 北京大学学报(医学版), 2021, 53(1): 120-125.
[4] 唐仁韬,李欣海,于江利,冯琳,高学军. 复合树脂与玻璃陶瓷微拉伸粘接强度的体外研究[J]. 北京大学学报(医学版), 2020, 52(4): 755-761.
[5] 李贝贝,邸萍. CAD/CAM钛合金表面处理工艺联合树脂粘接剂对硬质复合树脂粘接强度和耐久性的影响[J]. 北京大学学报(医学版), 2019, 51(1): 111-114.
[6] 郭惠杰,高承志, 林斐,刘伟,岳林. 唾液污染对复合树脂间粘接强度的影响[J]. 北京大学学报(医学版), 2017, 49(1): 96-100.
[7] 林斐, 刘伟, 闫鹏, 岳林. 复合树脂间粘接的微拉伸强度研究[J]. 北京大学学报(医学版), 2015, 47(1): 124-128.
[8] 蔡雪, 聂杰, 王祖华, 田洪琰, 赵莹, 王晓燕. 洞缘形态对复合树脂颜色匹配的影响[J]. 北京大学学报(医学版), 2015, 47(1): 120-123.
[9] 田福聪,王晓燕,高学军. 不同粘接系统用于楔状缺损直接修复的临床观察[J]. 北京大学学报(医学版), 2014, 46(1): 58-61.
[10] 袁慎坡, 林红, 潘硕, 娄丽丽, 徐永祥. Polident义齿清洁剂对义齿基托树脂性能的影响[J]. 北京大学学报(医学版), 2012, 44(6): 946-949.
[11] 徐永祥, 韩建民, 林红. 自黏性流动树脂的性能研究[J]. 北京大学学报(医学版), 2012, 44(2): 303-306.
[12] 高博韬, 郑刚, 林红, 徐永祥. 实时动态分析牙科光固化复合树脂固化收缩的新方法[J]. 北京大学学报(医学版), 2011, 43(6): 895-899.
[13] 韩冰, 董艳梅, 王晓燕, 高学军. 光照模式对复合树脂聚合收缩率和表面硬度的影响[J]. 北京大学学报(医学版), 2011, 43(5): 770-773.
[14] 赵奇*, 薛世华*, 吴艳, 王世明. 应用龈色树脂修复前牙颈部缺损的临床评价[J]. 北京大学学报(医学版), 2011, 43(1): 44-47.
[15] 韩冰, 王晓燕, 高学军. 光功率密度对光固化复合树脂耐老化性能的影响[J]. 北京大学学报(医学版), 2011, 43(1): 58-61.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!