口腔修复材料在锥形束CT影像中伪影的定量评价

摘要/Abstract

摘要： 目的：定量评价氧化锆等8种常见口腔修复材料在锥形束CT影像中产生伪影的程度。方法: 针对下颌第一磨牙全冠预备体，分别制作氧化锆、玻璃陶瓷、聚合瓷、金铂合金、纯钛、金钯合金、钴铬合金和镍铬合金共8种全冠，用离体牙作对照，固定在光固化树脂固定板上。用锥形束CT扫描全冠及离体牙，将DICOM数据导入MIMICS10.0软件，在二维断层图像中，定量评价全冠周围伪影的条纹数量和最大径。结果: 在二维断层图像中，天然牙、玻璃陶瓷和聚合瓷无伪影，氧化锆和金属均产生条状伪影，条数为5~9条/全冠，左右和上下最大径分别为2.4~2.6 cm和2.2~2.7 cm。结论: 在锥形束CT二维断层图像中，氧化锆和金属全冠周围均会产生伪影，玻璃陶瓷、聚合瓷全冠和天然牙齿不产生伪影。

关键词: 锥束计算机体层摄影术, 牙科材料, 牙修复体, 伪影

Abstract: To quantitatively evaluate the artifacts appearance of eight kinds of common dental restorative materials, such as zirconia. Methods: For the full-crown tooth preparation of mandibular first molar, eight kinds of full-crowns, such as zirconia all-ceramic crown, glass ceramic crown, ceramage crown, Au-Pt based porcelain-fused-metal (PFM) crown, Pure Titanium PFM crown, Co-Cr PFM crown, Ni-Cr PFM crown, and Au-Pd metal crown were fabricated. And natural teeth in vitro were used as controls. These full-crown and natural teeth in vitro were mounted an ultraviolet-curable resin fixed plate. High resolution cone beam computed tomography (CBCT) was used to scan all of the crowns and natural teeth in vitro, and their DICOM data were imported into software MIMICS 10.0. Then, the number of stripes and the maximum diameters of artifacts around the full-crowns were evaluated quantitatively in two-dimensional tomography images. Results: In the two-dimensional tomography images，the artifacts did not appear around the natural teeth in vitro, glass ceramic crown, and ceramage crown. But thr artifacts appeared around the zirconia all-ceramic and metal crown. The number of stripes of artifacts was five to nine per one crown. The maximum diameters of the artifacts were 2.4 to 2.6 cm and 2.2 to 2.7 cm. Conclusion: In the two-dimensional tomography images of CBCT, stripe-like and radical artifacts were caused around the zirconia all-ceramic crown and metal based porcelain-fused-metal crowns. These artifacts could lower the imaging quality of the full crown shape greatly. The artifact was not caused around the natural teeth in vitro, glass ceramic crown, and ceramage crown.

Key words: Cone-beam computed tomography, Dental materials, Dental prosthesis, Artifacts

原福松,孙玉春,谢晓燕,王勇,吕培军. 口腔修复材料在锥形束CT影像中伪影的定量评价[J]. 北京大学学报（医学版）, 2013, 45(6): 989-992.

YUAN Fu-song, SUN Yu-chun, XIE Xiao-yan, WANG Yong, LV Pei-jun. Quantitative assessment on artifacts of dental restorative materials in cone beam computed tomography[J]. Journal of Peking University(Health Sciences), 2013, 45(6): 989-992.

参考文献

相关文章 15

[1]	王鹃,尉华杰,孙井德,邱立新. 预成刚性连接杆用于无牙颌种植即刻印模制取的应用评价[J]. 北京大学学报（医学版）, 2022, 54(1): 187-192.
[2]	杨刚,胡文杰,曹洁,柳登高. 牙周健康的上颌前牙唇侧嵴顶上牙龈的三维形态分析[J]. 北京大学学报（医学版）, 2021, 53(5): 990-994.
[3]	梁峰,吴敏节,邹立东. 后牙区单牙种植修复5年后的临床修复疗效观察[J]. 北京大学学报（医学版）, 2021, 53(5): 970-976.
[4]	高璐,谷岩. 中国人群腭中缝形态特点分期与Demirjian牙龄的相关性[J]. 北京大学学报（医学版）, 2021, 53(1): 133-138.
[5]	李琳琳,赵一姣,陈虎,王勇,孙玉春. 转移牙合架固定法三维重建牙尖交错牙合的精度评价[J]. 北京大学学报（医学版）, 2020, 52(1): 138-143.
[6]	罗强,丁茜,张磊,谢秋菲. 后牙种植冠桥修复后局部咬合变化的定量分析[J]. 北京大学学报（医学版）, 2019, 51(6): 1119-1123.
[7]	贾鹏程，杨刚，胡文杰，赵一姣，刘木清. 根尖片评估单根牙骨内牙根表面积的准确性[J]. 北京大学学报(医学版), 2018, 50(1): 91-97.
[8]	马静，江久汇. 骨性Ⅱ类和Ⅲ类高角错牙合患者下切牙区的牙槽骨形态分析[J]. 北京大学学报(医学版), 2018, 50(1): 98-103.
[9]	徐筱，徐莉，江久汇，吴佳琪，李小彤，靖无迪. 锥形束CT评判安氏Ⅲ类错牙合上前牙骨开裂与骨开窗的准确性分析[J]. 北京大学学报(医学版), 2018, 50(1): 104-109.
[10]	曹婕1，孟焕新. 锥形束CT用于评估牙槽骨骨缺损的情况和骨再生区域骨密度的变化[J]. 北京大学学报(医学版), 2018, 50(1): 110-116.
[11]	常大桐，周彦恒，刘伟涛. 上颌反复快速扩缩对上气道影响的锥束CT研究[J]. 北京大学学报(医学版), 2017, 49(4): 685-690.
[12]	陈全，张晓1张智勇，高巍，刘文曙，孟甜，陈宇寰，王慧丽. 上颌窦前外侧壁骨内血管孔道位置锥形束CT影像判断分析及其临床应对措施[J]. 北京大学学报(医学版), 2017, 49(3): 540-546.
[13]	赵一姣，王斯维，刘怡，王勇. 基于影像学牙周膜解剖特征快速提取活体牙三维牙根形态的方法[J]. 北京大学学报(医学版), 2017, 49(1): 54-059.
[14]	苏征，白雨豪，侯晓玫. 不同技术对弯曲根管根尖气锁去除效果的锥形束CT研究[J]. 北京大学学报(医学版), 2017, 49(1): 76-080.
[15]	赵丽萍，詹雅琳，胡文杰，王浩杰，危伊萍，甄敏，徐涛，刘云松. 磨牙位点保存后进行种植修复及软组织增量的1例报告[J]. 北京大学学报(医学版), 2016, 48(6): 1090-1094.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed